SPECIFICATIONS

Brand Name: Ortur

Certification: CE,ce

Engraving Area: 400x400mm

Hign-concerned Chemical: None

Is Smart Device: Yes

Laser Power: 10w

Model Number: S2 LU2

Origin: Mainland China

1.Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1.8W-2.1W, engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min.

2.Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, when the engraving machine is displaced or tilted, it will automatically stop the laser; 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically.

3.New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.

4.Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotary rollers. Unleash your creativity on over one hundred materials including paper, bamboo, wood, leather PCB board, aluminum oxide, metal, glass, etc.compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(Paid). The ORTUR laser cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, and also support MacOS and Linux system.

Ortur Laser 1.8 Series Firmware has been optimized for faster speed engraving. Taking advantage of the faster ESP32 McU.

Ortur Laser 1.8 Series Firmware has been optimized for faster speed engraving. Taking advantage of the faster ESP32 McU.

1. The main frequency is as high as 240MHZ.

2. The working efficiency is high, and the machine moves fast.

3. With current and voltage detection functions, better protection of the machine.

4. Active power-off function, which can actively disconnect the power supply in the case of abnormal power supply.

5. Support LU3 series digital Laser module, it could adjust the laser heat dissipation time after the engraving is completed according to the use of the digital laser module.

6. The use of efficient real-time operating system Freertos system is more stable and more efficient.

ADVANTAGES:

1. ORTUR Laser Master 2 S2 LU2-2 is better at engraving exquisite patterns, and it has a very small spot (0.07x0.06mm) which can meet the needs of engraving various complex patterns.

2. Ortur laser master 1.8 firmware, smarter, faster, higher precision and easier to use.

3. It could pre-process 32 instructions, support baud rate as high as 921600.