SPECIFICATIONS

Brand Name: NoEnName_Null

Origin: DE(Origin)

Frequency Range: 50kHz-3GHz

Features:

*1. 3GHz second generation NanoVNA vector network analyzer is designed based on SAA-2 of OwOComm, and its performance is greatly upgraded. Compared with the basic SAA-2, SAA-V2 adopts a metal shell design, and the screen size is increased from 2.8 inches to 3.2 inches. At the same time, the functions of measuring duplexer, filter, S parameter and voltage standing wave ratio are added. What's more, it can be controlled by computer software compatible with Linux and Windows(7+).

*2. It can test antenna standing wave impedance, debug diplexer filter insertion loss isolation standing wave, test cable attenuation shortening factor phase, and test the amplification factor of antenna amplifier, and it has powerful function of frequency meter.

*3. Metal shell, large screen touch is more accurate, easy to operate, no need to connect power supply, not bound by data cable, and can be used alone. You can also measure the diplexer measurement filter.

*4. Powerful Frequency Meter: Improved frequency measurement can measure the antenna frequency from 2.4G to 3G. 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection measurement S11: 50dB (50kHz-1.5GHz) and 40dB (1.5GHz-3GHz); Antenna analyzer: 1.005(50KHz-1.5GHz) and 1.02(1.5GHz-3GHz).

*5. Improve Accuracy: NanoVNA SAA-V2 vector antenna analyzer is equipped with an upgraded shell, which has strong anti-interference ability and improves accuracy. Equipped with 3.2-inch touch screen and touch screen pen, making the operation more accurate and easy to operate.

*6. Power Supply: the SAA-V2 is powered by a built-in battery or USB; Built-in 2000mA-h battery can work continuously for about 3 hours on a full charge. If extra working time is needed, it can be connected to a power bank or a power supply.

Description:

*1. Measuring Frequency Range: 50kHz-3GHz

*2. Dynamic Range of System(after calibration): 70dB (50k to 1.5GHz); 60dB (to 3GHz)

*3. S11 Noise Floor(after calibration): -50dB (to 1.5GHz); -40dB (to 3GHz)

*4. Scanning Rate: 100 points/second

*5. Number of Scanning Points (on the device screen): adjustable, with a maximum of 201 points

*6. Number of Calibration Points (maximum number of USB scanning points): 1024 points (when connecting a computer to use the upper computer)

*7. Power Supply: USB, 400mA

*8. Radiofrequency Port: SMA (not RP-SMA)

*9. USB Interface: Micro-USB

*10. Display Screen: 3.2 inch TFT (320 x 480) touchscreen

*11. Battery: 2000 mAh 3.6V/3.7V lithium battery, 6*40*60 mm (maximum size)

*12. Net Weight: 320g

*13. Return Loss of Port 2: >= 13dB (to 3GHz), 20dB (to 1.5GHz)

*14. Display Tracking: 4, marking: 4, setting saving: 5.

*15. Computer Software Compatibility: for Linux, Windows (7 and later)

Package Includes:

1 x Network Analyzer

2 x SS405 MSA Needles(30cm)

1 x Calibrator(50 ohm load)

1 x Calibrator(short circuit device)

1 x Calibrator(circuit breaker)

1 x SMA Female Two-way

1 x USB Cable

1 x Instruction

1 x Stylus